Skip to content

Careful window and gutter cleaning. Quotes by phone: (843) 948-2214

Mount Pleasant · Charleston · James Island · Isle of Palms

(843) 948-2214
Worker in a navy cap and T-shirt brushing a removed window screen leaned against a brick house wall, with more screens, a bucket, bag and ladder nearby

ServicesScreen Cleaning & Repair

Window Screen Cleaning & Repair in Mount Pleasant

We wash window screens by hand, replace torn or sagging mesh, and straighten bent frames so each one seats tightly in its window. Clean, tight screens let you open the house to a cross breeze without letting bugs in, which can mean fewer hours on the air conditioner.

What screen care actually fixes

A window screen is simple: a rolled aluminum frame, a sheet of mesh, and a rubber spline pressed into a channel to hold the mesh taut. When any one of those parts fails, the screen stops doing its job. Pollen and dust fill the weave and choke airflow. The spline shrinks and lets the mesh go slack. A corner key cracks and the frame racks out of square, leaving a gap a mosquito can walk through.

Fixing those parts matters for comfort and running costs. A screen packed with grime can block a noticeable share of the breeze, so on a mild spring or fall evening you end up closing the window and turning on the AC. A clean, tight screen lets you ventilate instead. In the salt air around Mount Pleasant, washing the frames also slows the pitting and white corrosion that eat at aluminum.

Screen work pairs naturally with our residential window cleaning, since the screens have to come off for the glass anyway, and with window track and sill cleaning, which clears the channels the screens sit against.

What the work includes

Tagging each screen to its window
Before a screen comes out, we note the opening it belongs to. Two screens that look the same can be a quarter inch apart in height or width, and putting one in the wrong window leaves a gap along an edge.
Hand washing the mesh
We work a soft brush and mild soap into both sides of the mesh, then rinse at low pressure. A pressure washer stretches fiberglass screening and can push it out of the spline channel, so it stays in the truck.
Frame cleaning
Salt film and grime come off the frame channels and pull tabs with a wipe-down. That slows wear on the aluminum and keeps the screen from binding when it slides back into place.
Rescreening
Mesh that is torn, punctured or baggy gets cut out. New screening goes in with fresh spline matched to the channel width, and we trim the excess so the surface lies flat and taut.
Frame and hardware repair
Cracked corner keys, tired tension springs and lost pull tabs are swapped for new ones, and bowed frames are straightened. When a frame can no longer hold square, we show you why and lay out your options.
Reinstallation and fit check
Each screen returns to its own opening. We look along all four sides to confirm it sits evenly, with no daylight slipping past the edges.

Signs your screens need attention

  • The mesh looks gray or yellow

    That haze is usually pollen, dust and salt packed into the weave. It dims the view and cuts the airflow you open the window for.

  • Sagging or rippled screening

    Mesh that bellies out means the spline has dried, shrunk or slipped from its channel. Once it loosens, gaps open along the edges.

  • Small holes and tears

    Pets, kids and storm debris leave punctures. A pencil-size hole is enough for mosquitoes and gnats.

  • Screens that fall out or rattle

    A loose screen usually points to weak tension springs or a frame that has racked out of square. Wind will eventually pull it free.

  • Chalky white spots on the frame

    That powdery residue is aluminum oxidation, common near salt water. Cleaning it early keeps it from pitting deeper into the metal.

How a screen appointment runs

  1. 1

    A quick call to size the job

    Let us know about how many screens the house has, which ones have holes or broken hardware, and whether you would like the windows cleaned on the same trip. From that description we give you a quote.

  2. 2

    Walk-through and removal

    When we arrive, we go over the screens with you, point out the damage we see, and agree on which ones get repaired before any work begins. Then we tag each one and take it down.

  3. 3

    Washing and repair

    Clean screens dry in the open while we rescreen and replace hardware on the damaged ones. Nearly all repairs happen right there at your home, so your screens stay on the property.

  4. 4

    Refit and final look

    Every screen goes back in its own window and gets a fit check, then we walk the house with you to look over the results. We haul away the rinse water and the old mesh scraps.

Window cleaner and homeowner crouch on a walkway beside a brick home, looking at water spots on a window, with a bucket, spray bottle, brush pole and ladder nearby

What moves the price of screen work

Screen pricing comes down to how many screens there are and how much each one needs. A screen that only needs washing takes a few minutes. One that needs new mesh, spline and a corner key takes much longer. We go over what is driving the number when you call, so the quote matches the work.

Number and size of screens
More screens means more handling time. Oversized screens and sliding patio door screens take extra care to remove and rescreen.
Wash only or repair
Cleaning is the smaller line item. Rescreening, frame straightening and new hardware each add labor and materials.
Mesh type
Standard fiberglass is the usual choice. Heavier pet-resistant mesh or aluminum mesh costs more and is stiffer to roll into the frame.
Access
Second-story screens that come out from outside, or windows behind dense shrubs, take longer to reach safely.

Screen cleaning and repair questions

Something not covered here? (843) 948-2214

Can my screens be repaired, or do they need new frames?

Most can be repaired. Torn mesh, loose spline, broken corner keys and worn springs are all replaceable parts. A frame only needs replacing when the aluminum is kinked, badly corroded or too bent to hold square, and we will show you that before suggesting it.

Do clean screens really make a difference in energy use?

They can. A clogged screen restricts the breeze, so you are more likely to shut the window and run the air conditioner on a mild day. Clean, intact screens make natural ventilation practical for more of the spring and fall.

How often should screens be washed?

Once or twice a year suits most homes. Spring, after the heavy pine and oak pollen, is a good time, and a second wash in fall clears summer dust and salt film.

Can you upgrade to pet-resistant mesh?

Yes. If a dog or cat keeps pushing through a screen, we can rescreen it with a heavier pet-resistant mesh. It is thicker and slightly darker, so the view changes a little, and we will mention that before you choose.

Should I have my windows cleaned at the same time?

It is usually the efficient way to do it. The screens come out for residential window cleaning anyway, and clean glass behind dirty screens still looks dull. We can add window track and sill cleaning so the channels are clear when the screens go back in.

Clean corner picture windows on a brick house reflecting trees and sky, with a window washer pole, blue bucket, towels and tool bag on the lawn

Screens that seat tight and let air through

Tell us roughly how many screens are on the house and which ones have holes, loose mesh or lost pull tabs, and we will work out a clear quote during the same call. We serve Mount Pleasant and nearby towns including Charleston and Isle of Palms.